StudLogoOrientation
Sample Distribution Charts
Color Distribution
Material Distribution
Origin Distribution
| Photo | Generation | Molds | BottomStyle | InsideLogoOrientation | InsideLogoStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | PipStyle | InsideRibStyle | StudRecessStyle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
03 - Large logo - ribs across | 1 | None | Left To Right | Blockletters | None | Top right corner (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | Spotted | None |
 |
05 - Tubeless - Logo inside | 5 | None | Left To Right | Blockletters | None | None | None | None | None | Wide Straight 'O' | Centered Medium Bottom Edge | Mixed | Large (3mm) |
 |
06 - Full stud - with stud logo | 10 | None | None | None | None | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Centered Narrow Bottom Edge | Spotted | None |
 |
11 - Tubeless - No logo inside - corner pip | 17 | Cross-support | None | None | None | Right (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | Mixed | Large sloped (3mm) |
 |
12 - Tubeless - No logo inside - wide center pip | 4 | None | None | None | None | Left (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Centered Wide Bottom Edge | Across | Large sloped (3mm) |
 |
13 - Tubeless - No logo inside - other pips | 3 | None | None | None | None | Center (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Centered Narrow Bottom Edge | Across | Large (3mm) |
| 19 - Other parts - logo on studs | 3 | Waffles | Left To Right | Dogbone | None | Left + Right | Typed | None | None | Wide Straight 'O' | Mixed Narrow Top Edge | None | Large (3mm) | |
| 20 - Old logo - 3mm stud recess - center pip | 1 | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Centered Wide Bottom Edge | None | Large (3mm) | |
| 21 - Old logo - 3mm stud recess - corner-pip | 23 | Cross-support | None | None | None | None | None | None | None | Wide Straight 'O' | Double Cornered Narrow Bottom Edge | None | Large (3mm) | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 17 | Cross-support | None | None | None | Left (Bottom To Top) | None | None | None | Wide Straight 'O' | Double Cornered Narrow Bottom Edge | None | Small (2-2,2mm) | |
 |
24 - Tall wide straight 'O' - corner pip - smaller stud recess | 6 | Cross-support | None | None | None | Left (Bottom To Top) | Typed | None | None | Tall Wide Straight 'O' | Double Cornered Narrow Bottom Edge | None | Small (2-2,2mm) |
| 32 - Old logo - 2x2 with mold identifiers | 9 | Tubes Without Cross-support | None | None | Left (Bottom To Top) | Right (Bottom To Top)+Bottom | Typed | Top+Bottom/Top+Right | Normal | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | None | Small (2-2,2mm) | |
| 33 - Old logo - 2x3 with mold identifiers | 10 | Tubes Without Cross-support | None | None | Left (Bottom To Top) with exception(s) | Right (Bottom To Top) with exception(s) | Typed | Top+Bottom (right-aligned) | Normal | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | None | Small (2-2,2mm) | |
| 34 - Old logo - 2x4 with mold identifiers | 23 | Tubes Without Cross-support | None | None | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | None | Small (2-2,2mm) | |
 |
35 - Old logo - 2x2r - with mold identifiers | 2 | None | None | None | Right (Circumferential) | Center (Circumferencial) | Typed | None | None | Wide Round 'O' | Centered Narrow Bottom Edge | None | Small (2-2,2mm) |
 |
40 - Narrow Straight 'O' without mold identifiers | 1 | Cross-support | None | None | None | Left (Bottom To Top) | Typed | None | None | Narrow Straight 'O' | Double Cornered Narrow Bottom Edge | None | Small (2-2,2mm) |
 |
41 - Narrow Straight 'O' 1x6 with mold identifiers | 2 | Cross-support | None | None | Right (Top To Bottom) | Left (Bottom To Top) | Typed | None | None | Narrow Straight 'O' | Single Cornered Narrow Bottom Edge | None | Small (2-2,2mm) |
 |
42 - Narrow Straight 'O' 1x8 with mold identifiers | 5 | Cross-support | None | None | Right (Top To Bottom) | Left (Bottom To Top) | Typed | None | None | Narrow Straight 'O' | Single Cornered Narrow Bottom Edge | None | Small (2-2,2mm) |
| 45 - Other parts - modern logo | 1 | None | None | None | None | None | None | None | None | Modern | Single Cornered Narrow Bottom Edge | None | Medium (2,3-2,5mm) | |
| 90 - 90-Temp 10x20 | 1 | Cross-support | None | None | Bottom Right | None | None | None | None | Modern | Bottom | None | Large (3mm) |
03 - Large logo - ribs across (1953-1953)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
03f | Without slots, but with stud logo | 4 / 4 | 03d (Matching patterns),03e (Matching patterns) |
05 - Tubeless - Logo inside (1955-1956)
| Photo | CatId | Mold | Members | PipStyle | InsideRibStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|
 |
05d | Small blockletter - Mixed stud-logo | 1 / 9 | Centered Medium Bottom Edge | Both | Large (3mm) | |
 |
05e | Small blockletter - Mixed stud-logo | 1 / 9 | Centered Medium Bottom Edge | Mixed | Large (3mm) | |
 |
05f | Small blockletter - With stud-logo | 2 / 9 | Centered Medium Bottom Edge | Mixed | Large (3mm) | |
 |
05g | Small blockletter - With stud logo | 2 / 9 | Centered Wide Bottom Edge | Mixed | None | |
 |
05h | Small blockletter - No slotted bricks | 5 / 9 | Centered Wide Bottom Edge | Mixed | None |
06 - Full stud - with stud logo (1955-1956)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
06a | 1x2 slotted - pip long side - no dots | 4 / 8 | |
 |
06b | 1x2 slotted - pip long side - one dot | 4 / 8 | |
 |
06c | 1x2 slotted - pip long side - two dots below | 3 / 8 | |
 |
06d | 1x2 slotted - pip long side - two dots right | 4 / 8 | |
 |
06e | 1x2 no slots - pip long side - no dots | 3 / 8 | |
 |
06f | 1x2 no slots - pip long side - one dot | 4 / 8 | |
 |
06g | 1x2 no slots - pip long side - two dots below | 5 / 8 | |
 |
06h | 1x2 no slots - pip long side - two dots right | 4 / 8 | |
 |
06i | 1x2 mixed - pip short side - weak rib | 7 / 14 | |
 |
06j | 1x2 mixed - pip short side - full rib | 7 / 14 | 06k (Slot removed) |
11 - Tubeless - No logo inside - corner pip (1956-1957)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
 |
11a | 2x8 Single pip | 8 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Across | Left (Bottom To Top) | Typed | Large (3mm) | 11b (Matching patterns - only differs by number of pips) |
 |
11b | 2x8 Double pip | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Across | Left (Bottom To Top) | Typed | Large (3mm) | 11a (Matching patterns - only differs by number of pips) |
 |
11c | Unnumbered - sloped stud recesses | 19 / 22 | Single Cornered Narrow Bottom Edge | None | Across | None | None | Large sloped (3mm) | |
 |
11d | 2x4 Centered and mirrored numbers - corner-pip | 8 / 20 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11h | 2x3 Sloped stud recesses | 11 / 21 | Single Cornered Narrow Bottom Edge | None | Across | Left (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11i | 2x3 Normal stud recesses | 1 / 18 | Single Cornered Narrow Bottom Edge | None | None | Left (Bottom To Top) | Typed | Large (3mm) | |
 |
11j | 2x2 Sloped stud recesses - handwritten numbers | 1 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Hand-written | Large sloped (3mm) | 11k (Matching surface pattern),11l (Matching surface pattern) |
 |
11k | 2x2 Sloped stud recesses - typed weak numbers | 2 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11j (Matching surface pattern),11l (Matching surface pattern) |
 |
11n | 2x8 + 2x10 single pip - sloped stud recesses | 4 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Mixed | Right (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11o | 2x8 + 2x10 single pip - normal stud recesses | 4 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Mixed | Right (Bottom To Top) | Typed | Large (3mm) | |
 |
11p | 2x10 Double pip | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Across | Right (Top To Bottom) | Typed | Large (3mm) | 11y (Matching patterns) |
 |
11q | 1x2 Sloped stud-recesses | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11r (Matching surface pattern),11s (Matching surface pattern) |
 |
11r | 1x2 Sloped+Normal stud-recess | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11q (Matching surface pattern),11s (Matching surface pattern) |
 |
11s | 1x2 Normal stud-recess | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | 11q (Matching surface pattern),11r (Matching surface pattern) |
 |
11w | 2x4 Unnumbered - normal recess | 5 / 5 | Single Cornered Narrow Bottom Edge | None | Across | None | None | Large (3mm) | |
 |
11x | 1x2 Small stud recesses | 22 / 24 | Single Cornered Narrow Bottom Edge | None | Across | Center (Top To Bottom) | Typed | Small (2-2,2mm) | |
 |
11y | 2x10 Single pip | 8 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Across | Right (Top To Bottom) | Typed | Large (3mm) | 11p (Matching patterns) |
12 - Tubeless - No logo inside - wide center pip (1956-1957)
| Photo | CatId | Mold | Members | InsideRibStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|
 |
12a | Serif pos. numbers - shorter pip width | 22 / 22 | Across | Large sloped (3mm) | 12b (Matching patterns - only differs by pip-witdth) |
 |
12b | Serif pos. numbers - wider pip width | 22 / 22 | Across | Large sloped (3mm) | 12a (Matching patterns - only differs by pip-witdth) |
 |
12c | SanSerif pos. numbers - mold 1 | 22 / 22 | Mixed | Large (3mm) | 12d (Matching patterns) |
 |
12d | SanSerif pos. numbers - mold 2 | 22 / 22 | Mixed | Large (3mm) | 12c (Matching patterns) |
13 - Tubeless - No logo inside - other pips (1956-1957)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideRibStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
13b | 10x20 - All studs have recesses | 1 / 1 | Bottom | Cross-support | None | Bottom Right | None | None | Large sloped (3mm) | |
 |
13c | 10x20 - Four studs without recesses | 2 / 2 | Bottom | None | None | Bottom Right | None | None | Large sloped (3mm) | |
 |
13d | 2x4 Centered and mirrored numbers - centered pip | 9 / 13 | Centered Narrow Bottom Edge | None | Across | None | Center (Bottom To Top) | Typed | Large (3mm) |
19 - Other parts - logo on studs (1958-1969)
| Photo | CatId | Mold | Members | InsideLogoOrientation | InsideLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|
 |
19A | Waffle plates with stud recess, logo underneath and stud logo bottom to top | 16 / 16 | Left To Right | Dogbone | Large (3mm) | 19B (Matching waffle pattern) |
 |
19C | Waffle plates with stud recess, no logo underneath and large stud recess | 8 / 20 | None | None | Large (3mm) | |
 |
19D | Waffle plates with stud recess, no logo underneath and sloped stud recess | 4 / 16 | None | None | Large sloped (3mm) |
20 - Old logo - 3mm stud recess - center pip (1958-1959)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 20a | Tubes - wide pip | 19 / 19 |
21 - Old logo - 3mm stud recess - corner-pip (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 21a | 2x4 - Mold number left - pip right | 14 / 14 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | ||
| 21ab | 2x8 double pip right | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21ad | 2x10 double pip right | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
 |
21af | 1x2 - Mold #1 Stud logo along | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Center (Top To Bottom) | Typed | None | None | 21ag (Matching bottom pattern) |
 |
21ak | 1x6 Cross support Large Hole Unnumbered | 20 / 20 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | |
 |
21al | 1x6 Cross support Large Hole Numbered | 7 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | Typed | None | None | |
 |
21am | 1x8 Cross support Large stud recess Unnumbered | 16 / 18 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | |
| 21b | 2x4 - Mold number left - pip left | 2 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | ||
| 21c | 2x4 - Mold number right - sharp edges on tubes | 19 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21d | 2x4 - Double pip | 2 / 2 | Double Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21e | 2x4 - Wide tube-base #1 | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21f | 2x4 - Wide tube-base #2 | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21g | 2x4 - Normal "Pat. pend." #1 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21h | 2x4 - Normal "Pat. pend." #2 | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21i | 2x4 - Bold "Pat. pend." #1 | 20 / 20 | Mixed Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21j | 2x4 - Bold "Pat. pend." #2 | 18 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21k | 2x4 - Bold "pend." (normal "Pat") | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21l | 2x4 - Bold "Pat." (normal "pend") | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21m | 2x3 - Pip right - mold 1 | 13 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21n | 2x3 - Pip right - mold 2 | 15 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21q | 2x3 - Pip right - mold 3 (sharp tube edge 1) | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21r | 2x3 - Pip right - mold 3 (sharp tube edge 2) | 12 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21v | 2x2 pip left/right - vertical logo | 9 / 28 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | 21w (Matching bottom pattern - top rotated (pip + logo)) |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 23a | 2x4 - mold id right top to bottom - 2mm stud recess | 20 / 20 | Mixed Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23ab | 2x4 - obscured mold id | 1 / 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Round 'O' | ||
 |
23ad | 1x6 Cross support Small Hole Numbered Bold | 1 / 1 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None | None | Wide Straight 'O' | |
 |
23af | 1x8 Cross support Small hole Numbered Rotated pos.numbers | 7 / 8 | Centered Side Surface | Cross-support | Left (Left To Right) | Typed | None | None | Wide Round 'O' | |
| 23b | 2x4 - mold id right bottom to top - 2,1mm stud recess | 1 / 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23d | 2x4 - mold id left bottom to top #1 | 2 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23f | 2x4 - mold id right top to bottom - small pat.pend. | 17 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Small | Wide Straight 'O' | ||
| 23g | 2x4 - mold id right top to bottom #1 (slightly right-aligned mold.pos.) | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23h | 2x4 - mold id right top to bottom #2 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23i | 2x4 - mold id right top to bottom #3 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23j | 2x4 - mold id right top to bottom #4 | 14 / 14 | Mixed Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23l | 2x3 - pip right - weak mold pos | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23m | 2x3 - pip right #2 | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | 23n (Matching bottom pattern - but with smaller stud recesses) | |
| 23n | 2x3 - pip right #3 | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | 23m (Matching bottom pattern - but with smaller stud recesses) | |
| 23o | 2x2 - horizontal stud-logo | 2 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23q | 2x8 | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 23y | 2x3 Mirrored handwritten mold pos | 20 / 24 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Hand-written | None | None | Wide Round 'O' |
24 - Tall wide straight 'O' - corner pip - smaller stud recess (1958-1959)
| Photo | CatId | Mold | Members | BottomStyle | MoldPositionLayout | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|
| 24b | 2x10 | 7 / 8 | Tubes Without Cross-support | Right (Top To Bottom) | Right | Normal | ||
| 24c | 2x8 double pip left - pat pend left | 6 / 8 | Tubes With Cross-support | Left (Bottom To Top) | Right | Normal | ||
| 24d | 2x8 double pip right - pat pend left | 2 / 8 | Tubes With Cross-support | Left (Bottom To Top) | Right | Normal | ||
 |
24h | 1x6 Cross support Small Hole Numbered Normal Pip Right | 7 / 8 | Cross-support | Left (Bottom To Top) | None | None | |
 |
24j | 1x8 Cross support Small hole Numbered | 3 / 8 | Cross-support | Left (Bottom To Top) | None | None | |
 |
24l | Copy of 1x8 Cross support Small hole Numbered Glossy inside | 2 / 8 | Cross-support | Left (Bottom To Top) | None | None |
32 - Old logo - 2x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | PatPendLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|
| 32b | 2x2 - B-mold | 26 / 32 | Left (Bottom To Top) | Right (Bottom To Top)+Bottom | Top+Bottom/Top+Right | Wide Straight 'O' | ||
| 32c1 | 2x2 - C-mold 1 - Small mold-id left | 14 / 32 | Left (Top To Bottom) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Straight 'O' | ||
| 32c2 | 2x2 - C-mold 2 - Small mold-id right | 1 / 28 | Right (Top To Bottom) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Straight 'O' | ||
| 32d1 | 2x2 - D-mold 1 - Pip right | 8 / 32 | Left (Bottom To Top) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32e1 | 2x2 - E-mold 1 - Mold-id top to bottom | 3 / 34 | Left (Top To Bottom) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32e2 | 2x2 - E-mold 2 - Mold-id bottom to top | 1 / 28 | Left (Bottom To Top) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32f | 2x2 - F-mold | 1 / 2 | Right (Top To Bottom) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32k | 2x2 - K-mold | 7 / 34 | Right (Bottom To Top) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32l | 2x2 - L-mold | 3 / 36 | Right (Bottom To Top) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | 32l2 (Matching pattern - rotated 180 deg) |
33 - Old logo - 2x3 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|
| 33a | 2x3 - A-mold | 16 / 20 | Left (Bottom To Top) with exception(s) | Right (Bottom To Top) with exception(s) | Wide Straight 'O' | ||
| 33b1 | 2x3 - B-mold 1 (Normal 'B') | 13 / 18 | Left (Bottom To Top) | Right (Top To Bottom) | Wide Round 'O' | ||
| 33b2 | 2x3 - B-mold 2 (Large 'B') | 20 / 20 | Left (Bottom To Top) | Right (Top To Bottom) | Wide Round 'O' | ||
| 33c1 | 2x3 - C-mold 1 (Normal 'C') | 24 / 26 | Left (Top To Bottom) | Right (Top To Bottom) | Wide Round 'O' | ||
| 33c2 | 2x3 - C-mold 2 ('C.') | 2 / 3 | Left (Bottom To Top) | Right (Top To Bottom) | Wide Round 'O' | ||
| 33d1 | 2x3 - D-mold 1 (Plain) | 3 / 24 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Round 'O' | 33d2 (Matching pattern - rotated 180 deg) | |
| 33d2 | 2x3 - D-mold 2 (Rotated stud-logo) | 23 / 24 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Round 'O' | 33d1 (Matching pattern - rotated 180 deg) | |
| 33e | 2x3 - E-mold | 2 / 2 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Round 'O' | ||
| 33g | 2x3 - G-mold | 15 / 22 | Right (Top To Bottom) | Left (Top To Bottom) | Wide Round 'O' | ||
| 33h1 | 2x3 - H-mold (Plain) | 18 / 22 | Right (Top To Bottom) | Left (Bottom To Top) | Wide Round 'O' |
34 - Old logo - 2x4 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | PipStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 34a2 | 2x4 - A-mold 2 - Mold identifier left | 18 / 18 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34b | 2x4 - B-mold | 3 / 20 | Single Cornered Narrow Bottom Edge | Right (Top To Bottom) | Left (Top To Bottom) | Typed | Normal | Wide Straight 'O' | ||
| 34c | 2x4 - C-mold | 20 / 20 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34d1 | 2x4 - D-mold 1 - Small 'Pat. pend.' large 'D' | 13 / 20 | Single Cornered Narrow Bottom Edge | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Small | Wide Straight 'O' | ||
| 34d2 | 2x4 - D-mold 2 - Normal 'Pat. pend.' small 'D' | 15 / 22 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34e | 2x4 - E-mold | 3 / 22 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34f1 | 2x4 - F-mold 1 - Mold identifier left | 8 / 8 | Single Cornered Narrow Bottom Edge | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34f2 | 2x4 - F-mold 2 - Mold identifier right | 17 / 20 | Single Cornered Narrow Bottom Edge | Right (Top To Bottom) | Left (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34g1 | 2x4 - G-mold 1 | 5 / 22 | Single Cornered Narrow Bottom Edge | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | 34g2 (Matching pattern - rotated 180 deg) | |
| 34g2 | 2x4 - G-mold 2 - Rotated 180 deg. | 3 / 5 | Single Cornered Narrow Bottom Edge | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | 34g1 (Matching pattern - rotated 180 deg) | |
| 34h1 | 2x4 - H-mold 1 | 9 / 20 | Single Cornered Narrow Bottom Edge | Right (Top To Bottom) | Left (Bottom To Top) | Typed | Normal | Wide Straight 'O' | 34h2 (Matching pattern - rotated 180 deg) | |
| 34h2 | 2x4 - H-mold 2 - Rotated 180 deg. | 4 / 6 | Single Cornered Narrow Bottom Edge | Right (Top To Bottom) | Left (Bottom To Top) | Typed | Normal | Wide Straight 'O' | 34h1 (Matching pattern - rotated 180 deg) | |
| 34j1 | 2x4 - J-mold 1 | 18 / 18 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Straight 'O' | 34j2 (Matching pattern) | |
| 34j2 | 2x4 - J-mold 2 | 1 / 3 | Centered Side Surface | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | 34j1 (Matching pattern) | |
| 34m | 2x4 - M-mold | 14 / 22 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | None+Hand-written | Normal | Wide Round 'O' | ||
| 34o1 | 2x4 - O-mold 1 | 7 / 20 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34o2 | 2x4 - O-mold 2 | 3 / 3 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Straight 'O' | ||
| 34r | 2x4 - R-mold | 7 / 18 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34t2 | 2x4 - T-mold 2 - Rotated 180 deg. | 1 / 1 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34u | 2x4 - U-mold | 11 / 20 | Single Cornered Narrow Bottom Edge | Left (Bottom To Top) with exception(s) | Right (Bottom To Top) with exception(s) | Typed | Normal | Wide Round 'O' | ||
| 34v1 | 2x4 - V-mold 1 | 8 / 22 | Single Cornered Narrow Bottom Edge | Right (Bottom To Top) | Left (Bottom To Top) | Typed | Normal | Wide Round 'O' | 34v2 (Matching pattern - rotated 180 deg) | |
| 34v2 | 2x4 - V-mold 2 - Rotated 180 deg. | 1 / 1 | Single Cornered Narrow Bottom Edge | Right (Bottom To Top) | Left (Bottom To Top) | Typed | Normal | Wide Round 'O' | 34v1 (Matching pattern - rotated 180 deg) | |
| 34z2 | 2x4 - Z-mold 2 - Rotated 180 deg. | 1 / 1 | Centered Side Surface | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' |
35 - Old logo - 2x2r - with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | StudLogoStyle | Associations |
|---|---|---|---|---|---|
 |
35b2 | 2x2 Quarter Circle B prefix | 1 / 3 | Wide Round 'O' | |
 |
35c | 2x2 Quarter Circle C prefix | 1 / 3 | Wide Straight 'O' |
40 - Narrow Straight 'O' without mold identifiers (1965-1970)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
40a | 1x8 | 1 / 2 |
41 - Narrow Straight 'O' 1x6 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | PipStyle | Associations |
|---|---|---|---|---|---|
 |
41c1 | Cross support C-mold Corner pip | 7 / 10 | Single Cornered Narrow Bottom Edge | |
 |
41c2 | Cross support C-mold Center pip | 3 / 10 | Centered Side Surface |
42 - Narrow Straight 'O' 1x8 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | PipStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|
 |
42b | 1x8 Cross support Small hole B-mold | 10 / 12 | Single Cornered Narrow Bottom Edge | None | None | |
 |
42c1 | 1x8 Cross support Small hole C-mold Cornered pip | 3 / 10 | Single Cornered Narrow Bottom Edge | None | None | |
 |
42c2 | 1x8 Cross support C-mold Centered pip Aligned logos | 4 / 10 | Centered Side Surface | None | None | |
 |
42c3 | 1x8 Cross support C-mold Centered pip Rotated logos | 4 / 10 | Centered Side Surface | None | None | |
 |
42d1 | 1x8 Cross support D-mold Stud-logo bottom to top | 12 / 12 | Centered Side Surface | Left | Normal |
45 - Other parts - modern logo (1960-1990)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
45B | Samsonite waffle plates - modern logo | 5 / 5 |
90 - 90-Temp 10x20 (1962-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
90s | 10x10 Normal logo - X-shape - cross support - mold A | 1 / 1 |
| Generations | Molds | MoldMembers |
|---|---|---|
| 20 | 144 | 1411 |
Color
Angle
Motive
